Your Cart is Empty


Resistol Gloss - High Gloss Floor Finish - 20L


  • CFIA accepted
  • 25% solids content
  • High Gloss
  • Suitable for high and low speed maintenance programs
  • Coverage: Approximately 10,000 square feet per 20L

Resistol Gloss Floor Finish produces a high gloss while protecting the floor under the toughest conditions. Responds well to high speed burnishing and is excellent for high traffic areas.


  1. Blockade area until floor finish is dry as floors will be very slippery during the preparation and application of the finish.
  2. Scrub or strip floor thoroughly.
  3. Pick up stripped finish before it dries using a wet vacuum, a clean mop or auto-scrubber.
  4. Rinse with liberal amounts of cold clean water until all residues have been eliminated.
  5. Allow floor to dry completely before applying RESISTOL GLOSS


  1. Pour floor finish into bucket, saturate mop with RESISTOL GLOSS
  2. Press mop firmly into wringer to remove excess product but do not wring mop.
  3. Apply in even coats, allowing each coat to dry completely (drying time is approximately 30 minutes - may vary depending on temperature, and humidity).
  4. Apply 3 - 4 coats or until desired gloss is achieved (Never apply more than 4 coats per 24-hour period). 

stay in the loop